Slabs and foundations in Colorado Springs

Garage floors, shed and shop slabs, RV pads, equipment pads and footings. A slab is only as good as what it sits on, and around here that's often clay that moves.

Crew pumping concrete onto a rebar mat for a foundation slab

Sized for what it's carrying

A shed pad and an RV pad are not the same job. Sheds, small pads and patios are fine at 4 inches. Garage floors, shop slabs and RV pads usually go to 5 or 6 inches with rebar, and we thicken the edges where the weight concentrates.

If you're putting a car lift in a shop, tell us up front. The posts need thicker concrete underneath them, and that has to be planned before the pour, not after.

Rebar grid set in place as concrete is placed for a slab
Rebar set up on supports so it ends up in the middle of the slab, not lying in the dirt underneath it.

Base and vapor barrier

Every slab gets a compacted base. Slabs that will be enclosed, like a garage, shop or addition, also get a vapor barrier underneath so ground moisture doesn't wick up through the floor and ruin whatever's sitting on it.

Permits

Anything that's part of a building, like a garage, shop or addition, generally goes through the Pikes Peak Regional Building Department. Small detached sheds sometimes don't need a permit at all. We'll look at what you're planning and tell you what's needed.

What slabs cost

Most slab work lands between $8 and $16 a square foot. Thicker, heavily reinforced slabs and anything that needs a lot of excavation or grading will be toward the top of that range.

Common questions

Can you pour a pad for my hot tub?

Yes. Hot tub pads go at least 4 inches thick with rebar. There's more about them on our patios page.

How soon can I build on a new slab?

Light framing can usually start after a few days. Hold off on heavy equipment, vehicles and stacked materials for about a week, longer in cold weather.

Do you pour footings?

Yes, for decks, additions, garages and retaining walls. We'll work from your plans or your builder's.

Got concrete that needs work?

Call or text. If you can send a picture of the area, we can usually give you a rough idea before we even come out.

Call (719) 402-0690 Text us